Table of Contents
Advertisement
General information
Service life of the product will extend and the
possibility of problems will decrease if the product is
cleaned at regular intervals.
IDANGER:
Disconnect the product from mains supply
1'-..:-..Jblefore starting maintenance and cleaning
works.
There is the risk of electric shock!
I low the product to cool down before you
1'-.:-..J,clean it.
Hot surfaces may cause burns!
•
Clean the product thoroughly after each use. In
this way it will be possible to remove cooking
residues more easily, thus avoiding these from
burning the next time the appliance is used.
•
No special cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
•
Always ensure any excess liquid is thoroughly
wiped off after cleaning and any spillage is
immediately wiped dry.
•
Do not use cleaning agents that contain acid or
chloride to clean the stainless or inox surfaces
and the handle. Use a soft cloth with a liquid
detergent (not abrasive) to wipe those parts clean,
paying attention to sweep in one direction.
•
(fhis feature is optional. It may not exist on
your product.)
Do not use solid metal scrapers or abrasive
cleaning materials to clean the glass cover. Glass
surface can et dama ed
he surface might get damaged by some
detergents or cleaning materials.
,..._.,Do not use aggressive detergents, cleaning
powders/creams or any sharp objects during
cleaning.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass
since they can scratch the surface, which may
result in shattering of the glass.
Do not use steam cleaners to clean the
appliance as this may cause an electric shock.
Cleaning the hob
Electric hobs
1. Turn off the hotplates and wait until they cool
down.
2.
If necessary, clean the plates with a cleaning
agent (you can obtain cleaners/softeners from
specialty stores).
3. Warm only for a few minutes after cleaning in
order to have their top section dried.
4. Apply a thin layer of machine oil onto the top
surface of the hob re ularly in order to protect it.
~ 1-~P.<;<;'l. ~ ~ \~\<;<;<;<; ~ ~
l . \ \
~ ~
$
~ ~
l
~ ~ ~ ~
$6 9 9
~ ~ ~ ~ ~
$6 9
Cleaning the control panel
Clean the control panel and knobs with a damp cloth
and wipe them dry.
Cleaning the oven
To clean the side wall
(fhis feature is optional. It may not exist on your
product.)
1 .
Remove the front section of the side rack by
pulling it in the opposite direction of the side wall.
2.
Remove the side rack completely by pulling it
towards
Catalytic walls
(fhis feature is optional. It may not exist on your
product.)
The inner side walls (A) and/or the rear wall (B) of your
product may be coated with catalytic enamel. Catalytic
walls have a light matte colour and a porous surface.
25/EN
Hide quick links:
Advertisement
Table of Contents
