Cactus 900S Series Product Manual

Industrial grade sata ssd

Advertisement

Quick Links

Cactus Technologies, Limited
-900S Series
Industrial Grade
SATA SSD
Product Manual
February 10, 2017
www.cactus-tech.com
1

Advertisement

Table of Contents
loading

Summary of Contents for Cactus 900S Series

  • Page 1 Cactus Technologies, Limited -900S Series Industrial Grade SATA SSD Product Manual February 10, 2017 www.cactus-tech.com...
  • Page 2 Users of Cactus Technologies products for such unintended ® and unauthorized applications shall assume all risk of such use and shall indemnify and hold Cactus Technologies and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, costs, damages, expenses and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended and unauthorized ®...
  • Page 3: Table Of Contents

    Cactus Technologies, Limited Table of Contents 1.Introduction to Cactus Technologies -900 Series Industrial Grade SATA SSD Products .......... 5 1.1.Supported Standards ..........................6 1.2.Product Features ............................6 1.2.1.Host and Technology Independence ....................6 1.2.2.Defect and Error Management ......................6 1.2.3.Power Supply Requirements ......................7 2.Product Specifications ..............................
  • Page 4 Cactus Technologies, Limited 6.9.S.M.A.R.T. Write Log ..........................33 6.10.S.M.A.R.T. Read Remap Data....................... 33 6.11.S.M.A.R.T. Read Wear Level Data ......................33 Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 5: Introduction To Cactus Technologies -900 Series Industrial Grade Sata Ssd Products

    Cactus Technologies, Limited Introduction to Cactus Technologies -900 Series Industrial Grade SATA SSD Products Features: Solid state design with no moving parts • Industry standard 2.5” SATA Drive or 1.8” half-slim form factor • • Capacities from 4GB to 256GB for 2.5” SSD Capacities from 4GB to 128GB for half-slim SSD •...
  • Page 6 SATA SSD products, succeeding the highly reliable -602 series products. The -900 series SSD is a high capacity solid-state flash memory product that complies with the Serial ATA 2.6 standard and is functionally compatible with a SATA hard disk drive. Cactus Technologies -900 Series SATA SSDs provide up to 256GB of formatted storage capacity.
  • Page 7: Supported Standards

    Also, with the intelligent on-board controller, the host system software will not require changing as new flash memory evolves. Thus, systems that support the Cactus Technologies -900 Series Industrial SATA SSD products today will continue to work with future ...
  • Page 8: Power Supply Requirements

    Cactus Technologies, Limited 1.2.3. Power Supply Requirements Cactus Technologies -900 Series Industrial SATA SSD operates at a voltage range of 5.00 volts ±  10%. Product Specifications For all the following specifications, values are defined at ambient temperature and nominal supply voltage unless otherwise stated.
  • Page 9: System Performance

    < 1 non-recoverable error in 10 bits READ Endurance: > 2,000,000 erase/program cycles 2.5. Physical Specifications The following sections provide the physical specifications for Cactus Technologies -900 Series  Industrial SATA SSD products. Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual...
  • Page 10: 2.5" Sata Ssd Physical Specifications

    Cactus Technologies, Limited 2.5.1. 2.5” SATA SSD Physical Specifications Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 11 Cactus Technologies, Limited Figure 2-1. 2.5” SATA SSD Dimensions Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 12: Half-Slim Ssd Physical Specifications

    Cactus Technologies, Limited 2.5.2. half-slim SSD Physical Specifications Figure 2-2. half-slim SSD Dimensions Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 13 Cactus Technologies, Limited Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 14 Cactus Technologies, Limited Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 15 Cactus Technologies, Limited Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 16: Interface Description

    Cactus Technologies, Limited Interface Description The following sections provide detailed information on the Cactus Technologies -900 Series  Industrial SATA SSD interface. 3.1. SSD Pin Assignments and Pin Type Cactus Technologies -900 Series SATA SSD uses industry standard 7+12 connector. The ...
  • Page 17: Electrical Specification

    Cactus Technologies, Limited Signal Name Dir. Description Differential receive negative Differential receive positive Differential transmit negative Differential transmit positive 3.3V 3.3V power supply; not used 12V power supply; not used Ground. 5V power supply 3.3. Electrical Specification The following table defines all D.C. Characteristics for the SATA SSD Series. Unless otherwise stated, conditions are: Vcc = 5V ±...
  • Page 18: Ac Characteristics

    Cactus Technologies, Limited 3.3.3. AC Characteristics Cactus Technologies -900 Series SATA SSD products conforms to all AC timing requirements as  specified in the Serial ATA specifications. Please refer to that document for details of AC timing for all operation modes of the device.
  • Page 19: Feature Register

    Cactus Technologies, Limited 4.1.3. Feature Register This register provides information regarding features of the SSD that the host can utilize. 4.1.4. Sector Count Register This register contains the number of sectors of data requested to be transferred on a read or write operation between the host and the SSD.
  • Page 20: Status Registers

    Cactus Technologies, Limited Bit 1 (HS1) When operating in the Cylinder, Head, Sector mode, this is bit 1 of the head number. It is Bit 25 in the Logical Block Address mode. Bit 0 (HS0) When operating in the Cylinder, Head, Sector mode, this is bit 0 of the head number. It is Bit 24 in the Logical Block Address mode.
  • Page 21: Drive Address Register

    This bit is 0 when drive 1 is active and selected. Bit 0 (-nDS0) This bit is 0 when the drive 0 is active and selected. ATA Command Description This section defines the ATA command set supported by the Cactus Technologies -900 Series  SATA SSDs.
  • Page 22 Cactus Technologies, Limited COMMAND Code Check Power Mode E5h, 98h Data Set Management Download Microcode Execute Drive Diagnostic Flush Cache Flush Cache Ext Format Track Identify Drive Idle E3h, 97h Idle Immediate E1h, 95h Media Lock Media Unlock Read Buffer...
  • Page 23: Identify Drive-Ech

    Cactus Technologies, Limited COMMAND Code Write Buffer Write DMA Cah, CBh Write DMA Ext Write FPDMA Queued Write Multiple Write Multiple Ext Write Sector(s) 30h, 31h Write Sector(s) Ext Write Verify Definitions: FR = Features Register, SC = Sector Count Register, SN = Sector Number Register, CY = Cylinder Registers, DH = Drive/Drive/Head Register.
  • Page 24 Cactus Technologies, Limited Word Address Default Value Total Bytes Data Field Type Information 0F00H Capabilities: DMA, LBA, IORDY supported 4001H Capabilities: device specific standby timer minimum 0200H PIO data transfer cycle timing mode 2 0000H Single Word DMA data transfer cycle timing mode (not supported).
  • Page 25 Cactus Technologies, Limited Word Address Default Value Total Bytes Data Field Type Information 93-99 0000H Reserved 100-103 XXXXH Maximum user LBA for 48-bit addressing mode. 0000H Reserved 0001H # of sectors per Data Set Management command. 106-107 0000H Reserved 108-111...
  • Page 26: Support

    Cactus Technologies, Limited S.M.A.R.T. Support Cactus Technologies -900 Series SATA SSDs support S.M.A.R.T. Status and attribute reporting functions as determined by the value of the Feature Register. The S.M.A.R.T. subcommands supported are as follows: Code Sub Command Read Data Read Attribute Thresholds...
  • Page 27: Enable Operations

    Cactus Technologies, Limited Command 6.1. S.M.A.R.T. Enable Operations Enables the SMART function. This setting is maintained when the power is turned off and then back on. Once the SMART function is enabled, subsequent SMART ENABLE OPERATIONS commands do not affect any parameters.
  • Page 28: Attributes

    Cactus Technologies, Limited Selftest execution status 364-365 0000h Total time in seconds to complete offline data collection Reserved Offline data collection capability (no offline data collection) 368-369 0003h S.M.A.R.T. Capability Error logging capability (no error logging capability) Reserved Short self-test routine recommended polling time...
  • Page 29 Cactus Technologies, Limited Description Spare block count Spare block count worse chip Erase count ECC error count Corrected ECC error count UDMA CRC error count Number of reads Power on count Total LBAs written Total LBAs read The following tables lists the returned data for each reported attribute.
  • Page 30 Cactus Technologies, Limited Attribute ID 0002h Flags – Advisory type, attribute value is updated during normal operation This value is fixed at 100. Attribute value (worse value). Initial number of spare blocks of the flash chip with the worse current spare block count.
  • Page 31 Cactus Technologies, Limited Attribute ID 0002h Flags – Advisory type, attribute value is updated during normal operation Attribute value; this is fixed at 100. Attribute value (worse value). Total number of ECC errors (correctable and uncorrectable) 9-10 Reserved Attribute 204 : Correctable ECC Error Count...
  • Page 32 Cactus Technologies, Limited 0002h Flags – Advisory type, attribute value is updated during normal operation Attribute value; this is fixed at 100. Attribute value (worse value). Total number of UDMA ECC errors. 9-10 Reserved Attribute 232 : Total number of reads...
  • Page 33 Cactus Technologies, Limited Total number of power on cycles. 9-10 Reserved Attribute 241 : Total LBAs Written (in units of 32MB) Byte Value Description Attribute ID 0002h Flags – Advisory type, attribute value is updated during normal operation Attribute value; this is fixed at 100.
  • Page 34: Read Attribute Thresholds

    Cactus Technologies, Limited 6.6. S.M.A.R.T. Read Attribute Thresholds This command returns one sector of SMART attribute threshold data; the format is as follows: Byte Value Description 0010h SMART structure version 2-361 Attribute threshold entries 1-30 (12 bytes each) 362-379 Reserved...
  • Page 35 Cactus Technologies, Limited Erase count threshold as defined during pre-format 2-11 Reserved Byte Value Description Attribute ID – Total ECC Errors No threshold defined for this attribute. 2-11 Reserved Byte Value Description Attribute ID – Correctable ECC Errors No threshold defined for this attribute.
  • Page 36: Return Status

    Cactus Technologies, Limited Byte Value Description Attribute ID – Power on count No threshold defined for this attribute. 2-11 Reserved Byte Value Description Attribute ID – Total LBAs written No threshold defined for this attribute. 2-11 Reserved Byte Value Description Attribute ID –...
  • Page 37: Read Log

    Cactus Technologies, Limited 6.8. S.M.A.R.T. Read Log This command returns the data of the SMART log. When issuing this command, set the Sector Count register to the number of sectors to read and set the Sector Number register to the Log address. The Log...
  • Page 38: S.m.a.r.t. Write Log

    Cactus Technologies, Limited 326-327 Number of sectors for SMART Log at address 0xA3 328-511 Reserved The NCQ Command Error Log returns information about the most recent NCQ command failure. The Host Vendor Specific Logs can be used by the host to store and retrieve arbitrary data. The SMART Wear Level Data and SMART Remap Data logs return the same data that is also returned by the SMART A2 Read Wear Level Data and SMART A2 Read Remap Data commands.
  • Page 39 Cactus Technologies, Limited 508-509 Number of blocks in wear level class 256*n + 254 510-511 Number of blocks in wear level class 256*n + 255 Thus, the first sector (n= 0) returns information about wear level class 0 to 255. The 2 sector (n= 1) returns information about wear level class 256 to 511, and so on.
  • Page 40 32G -------------- 32GB 64G -------------- 64GB 128G ------------ 128GB (* for half-slim, custom build only) 256G ------------ 256GB * (2.5“ SSD only, custom build) * For custom builds, extra lead time required; please contact Cactus Technologies sales for  details...
  • Page 41 Cactus Technologies, Limited Appendix B. Technical Support Services B.1. Direct Cactus Technical Support Cactus Technologies Limited Suite C, 15/F, Capital Trade Center 62 Tsun Yip Street, Kwun Tong Kowloon, Hong Kong Tel: +852-27972261 Fax: +852-27973777 Email: tech@cactus-tech.com Cactus Technologies Limited -900 Series Industrial Grade SATA SSD Product Manual v1.0...
  • Page 42 Cactus Technologies, Limited Appendix C. Cactus Worldwide Sales Offices Cactus Technologies Limited Suite C, 15/F, Capital Trade Center 62 Tsun Yip Street, Kwun Tong Kowloon, Hong Kong Tel: +852-27972277 Fax: +852-27973777 Email: sales@cactus-tech.com US Office: Cactus USA 3112 Windsor Road, Suite A356...
  • Page 43 Industrial Grade Flash Storage Products. Cactus Technologies , at its sole   option, will repair, replace or refund the purchase price of the defective product. Cactus Technologies guarantees our products meet all specifications detailed in our product manuals. ...
  • Page 44 Customer Service department (tech@cactus-tech.com) with the following  information: product model number and description, nature of defect, conditions of use, proof of purchase and purchase date. If approved, Cactus Technologies will issue a Return Material  Authorization or Product Repair Authorization number. Ship the defective product to:...

Table of Contents