Honeywell STT700 SmartLine User Manual page 3

This manual is a detailed how to reference for installing, piping, wiring, configuring, starting up,
operating, maintaining, calibrating, and servicing Honeywell's family of STT700 temperature
transmitters. Users who have a Honeywell STT700 SmartLine Temperature Transmitter
configured for HART protocol or Honeywell's Digitally Enhanced (DE) are referred to the
STT700 SmartLine Series HART/DE Option User's Manual, document number 34-TT-25-18.
The configuration of your transmitter depends on the mode of operation and the options selected
for it with respect to operating controls, displays and mechanical installation. This manual
provides detailed procedures to assist first-time users, and it further includes keystroke
summaries, where appropriate, as quick reference or refreshers for experienced personnel.
To digitally integrate a transmitter with one of the following systems:

For the Experion PKS, you will need to supplement the information in this document with the
data and procedures in the Experion Knowledge Builder.

For Honeywell's TotalPlant Solutions (TPS), you will need to supplement the information in this
document with the data in the PM/APM SmartLine Transmitter Integration Manual, which is
supplied with the TDC 3000 book set. (TPS is the evolution of the TDC 3000).
Release Information:
STT700 SmartLine Temperature Transmitter User Manual, Document # 34-TT-25-17,
Rev.1 July 2017
Rev.2 February 2018
Revision 2
About This Manual
st
1 Release
FM Approval updates
STT700 Temperature Transmitter User's Manual
Page iii