Brother ADS-2000 Service Manual page 86

(2) Disconnect the power supply PCB harness from the guide behind the machine, and pull it
out from the hole.
(3) Remove the screw pan (S/P washer) M3.5x6 screw and the four taptite bind B M3x10
screws to remove the power supply earth harness, the main PCB earth plate, and the
power supply unit from the machine.
Screw pan (S/P washer) M3.5x6
Taptite bind B M3x10
Power supply earth harness
Taptite bind B M3x10
Main PCB earth plate
Power supply
PCB harness
Hole
Fig. 3-33
3-34
Power supply unit
Guides
Confidential