Switching The Source For Each Destination - Sony MVS-6000 User Manual

Switching the Source for Each Destination

You can switch the source for each destination with a menu operation.
For the assignment of destinations and sources to buttons, use the Setup
>Panel >Aux Assign >RTR Mode Setting menu. For details, refer to "Using
the Auxiliary Bus Control Block for Router Control" in Chapter 19 (Volume 3).
1
2
3
326
Router Control Menu Operations
Press [Change Xpt].
The Router >Router Control >Router Control >Change Xpt menu appears.
Destination Select buttons appear in groups of 16.
Source Select buttons appear by group (maximum 24 buttons).
Press one of the Destination Select buttons, to select the destination for
which you want to switch the source.
To change the group
Press one of the [1-16], [17-32], [33-48], and [49-64] buttons.
Press one of the Source Select buttons, to select the source you want to
switch.
To change the group
Press one of the [1-24], [25-48], ... [97-120], and [121-128] buttons.