5 port poe unmanaged 10/100mbs switch/extender (3 pages)
Summary of Contents for LAN Power LP-2340
Page 1
INSTALLATION MANUAL LP-2340 Internal Single Channel PoE and Ethernet Data Extender V 1.1.0 LAN Power Telephone: +1 (510) 275-4572 44240 Fremont Blvd, Fremont, Ca. 94538 USA FAX: +1 (510) 284- 2420 Web Site Address : www.lan-power.com Email: support@lan-power.com...
●All work related to the installation of this product should be made by qualified service personnel or system installers. ●The connections should comply with local electrical code. Caution: Do not use a cross over cable between the LP-2340 output port and the connected device.
Introduction The LP-2340 is an internal Single Channel PoE & Ethernet Data network extender comes with high reliability design, which provides for a simple installation and is able to work stably in wide temperature range. Not only can be powered by standard IEEE802.3af/at PoE devices, it can also be driven by 48VDC power input using the optional LP- 2340PSU.
Front view: 12VDC Input Optional: LP-2340PSU Input Data & PoE Input Data & PoE Input Rear view: Data Output Data & PoE Output Application Overview...
Page 5
● Ensure that the cable length from the ‘Data & PoE OUT’ on the LP- 2340 to the IP Device does not exceed 100 meters (328 ft.). ● There is no "on-off" switch - when connected correctly the LP-2340 is operational and no programming is required.
PoE Device Indicators Input Indicators Color Indication No external DC power source Unlit connected 48VDC Input Steady amber LP-2340PSU connected power sourcing Unlit equipment connected (No PoE PoE Active input) Steady amber Incoming PoE connected Unlit Data link is not connected 10Mbps Flashing green Transferring data at 10Mbps...
Power over Ethernet (PoE) IEEE 802.3af(PoE), IEEE802.3at(PoE+) PoE standard compliant PoE power supply type End-span and Mid-span PoE input power 48VDC, 34.2W max PoE output power 48VDC, 30.0W max Power Pins Assignment 1/2(+),4/5(+), 3/6(-), 7/8(-) PoE Ports Assignment PoE input: 1x RJ-45 Extends Range (by RJ-45 100 meters (328ft) Port)
System on: 0.2W Full load: 1.5W Power Consumption Physical Specifications Dimensions (W x D x H): 100 x 42 x 24 mm ( 3.93 x 1.65 x 0.94 in.) Weight: 0.2 kg (0.44 lbs) Dimensions: (WxDxH) 100.0mm 62.0mm 24.0mm Troubleshooting Symptom Corrective steps 1.
Page 9
4. Remove and re-apply power to the device and check the indicators during power up sequence. 1. The extender does not detect a PSE; and the port is not enabled. 2. Verify that the IP Device is designed for PoE operation (i.e. PoE Enabled). 3.
Compatible Devices: – Optional Mains Power Supply Unit which provides 48vdc power LP-2340PSU to the LP-2340 – External PoE and Ethernet Data Extender – housed in an IP67 LP-2360 enclosure with same features and connections – wider temperature rating of - 30 °C to 60 °C...
Page 11
For further information on this product and all the LAN Power products www.lan-power.com please visit our web site at: LAN-Power reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should consult LAN-Power to determine whether any such changes have been made.