Table of Contents
Advertisement
Available languages
Available languages
Note:
Instead of pressing
to the first letter of the entry you wish to locate.
For example, pressing 2 will show the first entry starting with A. Pressing 2 again will show the first entry
starting with B, and so on..., and then press
8
CALLER DISPLAY (NETWORK DEPENDENT)
If you have subscribed to the Calling Line Identification (CLI) service with your network service provider,
the phone number of your caller will appear on the handset display when there is an incoming call and
then stored in your Call Log.
If the caller's number is stored in your phonebook along with the name, the name will appear on the
handset display and then stored in the Call Log.
Note:
If the call is from someone whose number is unavailable, or if you have not subscribed to Caller Line
Identification service, the handset will display "UNAVAILABLE" when you receive the call.
Information about incoming calls varies by country and network operators.
8.1
Call Log
The "Call Log" stores the last 10 external calls, whether or not you have answered the call.
Only the most recent call is saved if there are repeat calls from the same number.
When the "Call Log" is full, the next new call will replace the oldest entry.
8.1.1
Access the Call Log
• From the home screen, press
• Press
to browse through the call list.
> The calls are displayed in chronological order with the most recent call at the top of the list.
9
REDIAL LIST
The redial list stores the last 5 numbers dialed. A maximum of 24 digits can be displayed for each entry.
9.1
Access the Redial List
• From the home screen, press
• Press
to browse the redial list.
> The last dialled number will appear first in the redial list.
10
RESET THE UNIT
You can reset your phone to its default settings with this feature.
Note:
Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will
return to its default settings. However, your phonebook will remain unchanged after reset. Also, if you have
an answering machine model, any recorded messages will remain unchanged, while all other settings will
be reset.
• From the home screen, press
• Press
to "ADVANCED SET" and then press
• Press
to select "RESET" and then press
• Press
again to confirm.
> A confirmation beep is played and the unit is reset to its default settings.
to browse the phonebook entries, you can press the numeric key corresponding
, if necessary, to find the entry you want.
.
.
.
to select.
to select.
8
Advertisement
Table of Contents
