Honeywell Satellite XT 9602-0200 4-20 mA Operation Manual page 40

A L A R M 1
A L A RM 1 T R I GG E R
s e l e c t : 3
A L A R M 1 T R I G G E R
GR E A T E R T H A N
s e l e c t :
A L A R M 1 T R I G G E R
L E S S T H A N
s e l e c t :
A L A R M 1
A L A RM 1 L A T C H
s e l e c t : 4
A L A R M 1 L A T C H
D I S A B L E D
s e l e c t :
A L A R M 1 L A T C H
E N A B L E D
s e l e c t :
Satellite XT 4-20 mA Versions
Used to define the trigger condition for Alarm 1
activation. Default setting is Greater Than. Use the
<set> key to enter. The instrument will show the actual
o f 4
setting.
Defines that an Alarm 1 condition will be indicated when
the actual gas concentration exceeds the preset level
for Alarm 1.
1 o f 2
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
Defines that an Alarm 1 condition will be indicated when
the actual gas concentration falls below the preset level
for Alarm 1.
2 o f 2
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit..
Used to define the Alarm 1 activation to be either latch-
ing or non-latching.
Default setting is enabled. Use the <set> key to enter.
o f 4
The instrument will show the actual setting.
When latching is enabled, alarm reset must be done
manually. Nonlatching alarms will be reset automati-
cally, upon correction of the alarm condition.
Defines the Alarm 1 activation to be non-latching.
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
1 o f 2
Defines the Alarm 1 activation to be latching.
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
2 o f 2
Configuration - Section 6
Alarm 1 Trigger
Greater Than
Less Than
Alarm 1 Latch
Disabled
Enabled
6-6