Sharp PJ-TA181 Service Manual page 10

1. Remove the motor ass'y in accordance with "REMOVE OF MOTOR ASS'Y".
2. Remove 2 screws holding the hinge ass'y to the body (For PJ-TA181).
3. Remove 2 screws holding the hinge ass'y to the slide shaft ( For PJ-SL181).
4. Remove the screw holding the link rod to the turning axle.
5. Remove the turning axle from the hinge.
6. Now the hinge ass'y is free.
Screw
Wave washer
Turning spring
Steel ball
Steel ball
Ball spring
Nut
REMOVE OF HINGE ASS'Y
Link rod
Turning axle
Hinge
Body
Model : PJ-TA181
Screw
Wave washer
Turning spring
Steel ball
Nut
Steel ball
Hinge spring
Ball spring
Hinge support
Screw
Screw
Fig. 6
10
Link rod
Turning axle
Hinge
Hinge spring
Hinge support
Hinge support - B
Slide shaft
Model : PJ-SL181
Screw
Screw