Cisco ASR 900 Series Manual page 166

Mpls basic configuration guide, cisco ios xe everest 16.5.1
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Flex LSP Sticky
Reverse Bandwidth: 200 kbps, Standby: 200 kbps
Fault-OAM: enabled, Path-Protection: ready, Wrap-Protection: enabled, Wrap-Capable: Yes
Fault-OAM Events:
Active Path Option Parameters:
State: dynamic path option 10 is active
BandwidthOverride: disabled
Binding SID: 28
Node Hop Count: 2
InLabel
OutLabel : GigabitEthernet0/0/1, 121
Next Hop : 102.106.12.1
Reverse Associated LSP Information:
Signaled Name: 54.4.4.4 1000
Tunnel: 1000, Source: 54.4.4.4, Dest: 56.6.6.6, LSP: 13 State: Up
Lockout Info:
Locked out: No
Lockout Originated By: None
Association:
Association Type: Single Sided Bidirectional LSPs
Association ID: 1000 Source: 56.6.6.6
Extended Association:
Global source: 1000
Extended ID:
0x36040404 (54.4.4.4)
0x0000000D (0.0.0.13)
0x00000000 (0.0.0.0)
0x00000000 (0.0.0.0)
RSVP Signalling Info:
RSVP Path Info:
My Address: 102.106.12.2
Explicit Route: 102.106.12.1 102.104.2.1 102.104.2.2 54.4.4.4
Record
Tspec: ave rate=200 kbits, burst=1000 bytes, peak rate=200 kbits
RSVP Resv Info:
Record
Fspec: ave rate=200 kbits, burst=1000 bytes, peak rate=200 kbits
Shortest Unconstrained Path Info:
Path Weight: 4 (TE)
Explicit Route: 102.106.12.2 102.106.12.1 102.104.2.1 102.104.2.2
Sticky Primary Path Info:
Path Option Index: 10
Explicit Route: 102.106.12.2 102.106.12.1 102.104.2.1 102.104.2.2
History:
Tunnel:
Time since created: 42 seconds
Time since path change: 21 seconds
Number of LSP IDs (Tun_Instances) used: 18
Current LSP: [ID: 18]
Uptime: 21 seconds
Prior LSP: [ID: 16]
ID: path option unknown
Removal Trigger: path error
Router# show mpls traffic-eng tunnels tunnel 1000 protection
asr167_t1000
LSP Head, Tunnel1000, Admin: up, Oper: up
Src 56.6.6.6, Dest 54.4.4.4, Instance 18
Fast Reroute Protection: None
Lockout Info:
Locked Out: No
Path Protection: 0 Common Link(s), 0 Common Node(s)
Primary lsp path: 102.106.12.2 102.106.12.1 102.104.2.1 102.104.2.2
Protect lsp path: 101.106.1.2 101.106.1.1 101.105.7.1 101.105.7.2
Path Protect Parameters:
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
158
:
-
Src 56.6.6.6, Dst 54.4.4.4, Tun_Id 1000, Tun_Instance 18
Route:
NONE
Route:
NONE
54.4.4.4
54.4.4.4
54.4.4.4
103.105.9.2 103.105.9.1 103.104.10.1 103.104.10.2
54.4.4.4
LockDown(Sticky): enabled
Flex LSP Overview
Verbatim: disabled

Advertisement

Table of Contents
loading

Table of Contents