2. To answer an incoming half-duplex call, press PTT. To
answer an incoming full-duplex call (indicated by
Spkr/Erpce keys), press
3. To end the call, press
Your terminal can alert you of an incoming call. Select the alert
settings in the Vibrate menu and Tones menu items
Private Call in DMO
If configured by your Service Provider it is possible to make
and receive a Private Call in DMO. You can make or receive
a DMO Private Call only when your MTP850 is in DMO.
Private Calls via DMO Repeater and/or DMO Gateway are not
supported.
The calling and called party needs to be on the same
talkgroup.
Making a DMO Private Call
1. From the Home display enter a number.
via
• Contact List or
• Recent Calls Lists
works like described in "Other Ways of
Dialing" on page 66.
2. Press and hold PTT. Wait for the talk permit tone (if
configured) before talking, and release the PTT when
listening.
3. The call ends after a pre-programmed time, or if you
press
There is no presence check for Private Calls in DMO. This
means you don't know whether the called party is available
when you start the call.
68
.
.
.
Private #:
2234
CType
Delete