Cisco HWIC-4ESW User Manual page 47

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
mac-address-table secure mac-address
fastethernet interface-id [vlan vlan-id]]
Example:
Router(config)# mac-address-table secure
0000.0002.0001 fastethernet 0/1/1 vlan 2
Step 4
end
Example:
Router(config)# end
Step 5
show mac-address-table secure
Example:
Router# show mac-address-table secure
Example
Use the show mac-address-table secure to verify the configuration, as illustrated below:
Router# show mac-address-table secure
Secure Address Table:
Destination Address
-------------------
0000.0002.0001
Creating a Static Entry in the MAC Address Table
Follow these steps to create a static entry in the MAC address table.
SUMMARY STEPS
1.
2.
3.
4.
5.
Address Type
------------
Secure
enable
configure terminal
mac-address-table static mac-address fastethernet interface-id [vlan vlan-id]
end
show mac-address-table
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Secures the MAC address traffic on the port.
Returns to privileged EXEC mode.
Verifies the configuration.
VLAN Destination Port
---- --------------------
2 FastEthernet0/1/1
How to Configure EtherSwitch HWICs
Book Title
47