Table of Contents
Advertisement
3.6.2 Steps
1. Configuring the HG520s
Follow the steps described below:
(1)
Log in to the Web configuration page. For the procedure,
refer to 2.3 "Establishing Configuration Environment".
(2)
Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3)
In the WAN configuration page, select the PVC that needs to
be configured. Click the editing icon of the PVC to display the
configuration page.
(4)
Select Bridged+DHCP in the PVC configuration page. Set
the operation mode to Enable. Configure the relevant
parameters in Figure 3-4 according to the values in the
Table 3-4.
(5)
Click Submit.
(6)
Select Basic > DHCP in the navigation tree to display the
DHCP configuration page.
Figure 3-4 Configuring the DHCP mode
[a8]
20
Advertisement
Table of Contents
