Table of Contents
Advertisement
Table 1-2 shows descriptions of interfaces and buttons in the rear
panel of the HG520s.
Table 1-2 Descriptions of Interfaces and Buttons
Interface/Button
Antenna
ADSL
LAN1~4
RESET
POWER
ON/OFF
1.2.3 Splitter
The external splitter can efficiently reduce the signal disturbance
on the telephone line. When voice and data are transmitted through the
same telephone line at the same time, you need an external splitter to
separate the voice and data signals:
LINE: Connecting to the phone jack on the wall.
PHONE: Connecting to the telephone.
MODEM: Connecting to the ADSL interface of the HG520s.
Antenna for wireless Internet access.
RJ-11 connector for connection with the telephone jack
or a splitter through a telephone line.
RJ-45 connector for connection with the Ethernet port
of a computer or a LAN hub.
To make the equipment restored and restarted, press
the RESET button and release it within 3 seconds. To
make the equipment restore the default settings of the
HG520s, press the RESET button and release it after 3
seconds. Once you use this function, all your
customized settings will be lost. Therefore, please be
careful with it.
Connect to the power adapter.
Switch on/off HG520s.
Description
4
[a2]
Advertisement
Table of Contents
