Bulb; Pull The Bulb Straight Out Of Its; Test The Lights To Make Sure The New Bulb Is Working - Honda Element 2006 Reference Owner's Manual

Main Menu
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. When reinstalling the taillight
assembly, first place the two pins
in the holes in place. Tighten the
two mounting bolts.
Table of Contents
Replacing a Rear License Plate

Bulb

LENS
HOUSING
SCREWDRIVER
1. Place a cloth and insert a small
flat-tip screwdriver between the
left edge of the lens and the
housing. The lens will come down.
2.

Pull the bulb straight out of its

socket. Push the new bulb in until
it bottoms in the socket.
CLOTH
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
Lights
BULB
LENS
183