Remove The Socket From The Light Assembly By Turning It One-Quarter Turn Counterclockwise; Socket - Honda Element 2006 Reference Owner's Manual

Main Menu
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Test the lights to make sure the
new bulb is working.
6. (Driver's side)
Install the front end of the air
intake duct.
Table of Contents
Replacing a Front Side Marker
Light Bulb
1. Place a cloth between the trim of
the lens and the body, at the top of
the lens. Remove the front side
marker light assembly by carefully
prying on the trim of the lens with
a small flat-tip screwdriver.
SCREWDRIVER
LIGHT
ASSEMBLY
CLOTH
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Lights
LIGHT ASSEMBLY

SOCKET

CONTINUED
181