NETGEAR FVM318 Reference Manual page 69

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Click the button next to an unused profile in the table and click Edit.
b.
The VPN Settings - IKE window opens as shown in
Figure 4-12: VPN Edit menu for connecting with a VPN client
Choose Main Mode for IKE automated method for establishing a shared security policy
c.
and authenticated keys.
Type VPNLANPC
d.
Note: This name must match the name of the Security Association defined in the VPN
client on the remote PC.
Enter LANAPCIPSEC as the Local IPSec Identifier for the FVS318 on LAN A.
e.
Note: This IPSec name must not be used in any other SA definitions in this VPN network.
Enter PCIPSEC as the Remote IPSec Identifier for the PC.
f.
In this case, the remote network is a single PC, and its IP address is unknown since it will
g.
usually be assigned dynamically by the user's ISP. We will choose an arbitrary "fixed
virtual" IP address to define this connection. This IP address will be used in the
configuration of the VPN client. For this example, enter 192.168.100.2 as the Remote IP
Network.
4-14
in the Connection Name box for this Security Association tunnel.
Figure 4-12 below:
Virtual Private Networking