NETGEAR R8500 Quick Start Manual page 19

3. Set up Ethernet port aggregation on the device that is
connected to Ethernet port 1 and port 2 on the router.
For information about how to set up Ethernet port aggregation
on your device, see the documentation that came with your
device.
For information about viewing the status of the Ethernet port
aggregation, see the user manual, which is available online at
downloadcenter.netgear.com
user interface.
Enable Dynamic Quality of Service
Dynamic Quality of Service (QoS) resolves Internet traffic
congestion when Internet bandwidth is limited by using better
application and device identification, bandwidth allocation, and
traffic prioritization techniques. If you like gaming and streaming
videos, then you can benefit from enabling Dynamic QoS.
Note: If you use a gigabit Internet connection, or your Internet
download and upload speed is 300 Mbps or faster, then you don't
need to use Dynamic QoS.
¾ To enable Dynamic QoS:
1. Launch a web browser and enter www.routerlogin.net in the
address field of the browser.
A login window displays.
2. Enter the router user name and password.
The user name is admin and the default password is password.
Use the default credentials if you did not change them.
The BASIC Home page displays.
3. Select Dynamic QoS.
The Dynamic QoS page displays.
or through a link in the router's
17