Bluetooth - Kenwood NX-3000 Series User Manual

If your transceiver has been programmed with the Bluetooth function, you can
connect your transceiver with a Bluetooth headset to make hands-free calls.
The Bluetooth specifications are as follows.
Version : Version 3.0
Power class : Class 2 (2.5 mW, up to 10 m)
Profile : Headset Profile (HSP), Serial Port Profile (SPP)
Device class : Phone
Note:
The communication distance varies depending on the obstacles between the
●
communication devices and the radio wave conditions.
Only headsets which support the Headset Profile (HSP) certified by Bluetooth SIG can be
●
used with the transceiver. However, operations are not guaranteed in all headsets.
Refer to the following URL for details on the Bluetooth devices operationally tested by
●
KENWOOD:
http://manual2.jvckenwood.com/com/help_ref/nx5000_series/compatible_model_list/CNMJSYnnzoitpv.html
If you wish to use a Bluetooth device that is not operationally tested, please consult your
dealer.
If the Bluetooth Serial Port Profile is enabled by your dealer, you can make a wireless
connection between your transceiver and the Bluetooth-enabled device such as a
PC using the Serial Port Profile. With the Serial Port Profile, you can connect your
transceiver to a PC without using a programming cable to communicate with the Field
Programming Unit (FPU) or to use the PC Interface Protocol.
For details on the Field Programming Unit (FPU) or PC Interface Protocol, consult
your dealer.
Selecting the Bluetooth headset type
o
You can select the type of Bluetooth headset to be connected to the transceiver via
HSP connection.
1
Press the button programmed as [Menu] to enter Bluetooth Headset Connection
Type Mode using the Menu Mode.
2
Press the [J] and [K] buttons to select the desired headset type.
3
Press the [ ] or [ ] button to confirm the selection.
The selection is backed up and will take effect the next time the transceiver is turned
●
on.
Note:
If you exit the Bluetooth Headset Connection Type Mode without pressing the [ ] or [ ]
●
button, the headset type selected will not be reflected in the menu setting.
Most Bluetooth headsets can be connected and operated by selecting "Headset 1" in
●
"Bluetooth Headset Connection Type". For some headsets, it is necessary to select
"Headset 2".
Most Bluetooth headsets can be connected and operated by selecting "Headset 1" in
●
"Bluetooth Headset Connection Type". For some headsets, it is necessary to select
"Headset 2". For details, refer to the following URL:
http://manual2.jvckenwood.com/com/help_ref/nx5000_series/compatible_model_list/CNMJSYnnzoitpv.html
56

Bluetooth