Specifications; General Power Tool Safety Warnings; Intended Use; Power Supply - Makita LW1401 Instruction Manual

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Hole diameter
No load speed
Dimensions
(L x W x H)
Net weight
Safety class
without notice.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Wear safety glasses.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for cutting in ferrous materials with
appropriate abrasive cut-off wheel. Follow all laws and
regulations regarding dust and work area health and
safety in your country.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
With European type safety
guard
With safety guard other than
European type
With European type safety
guard and under cover
LW1400
530 mm x 295 mm x 640 mm
530 mm x 290 mm x 640 mm
18.7 kg

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
with this power tool. Failure to follow all instructions
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
liquids, gases or dust.
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
2.
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
2 ENGLISH
LW1401
355 mm
3 mm
25.4 mm
-1
3,800 min
500 mm x 295 mm x 640 mm
500 mm x 290 mm x 620 mm
18.3 kg
/II
-
-