Table of Contents
Advertisement
Depart. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
1.Home page parameter (URL):
This parameter is a string of characters (ASCII) used to identify the protocol (eg: HTTP), the location of the
server
(eg:
WAP.Philips.com),
(e
g:/glossair/glossair.htm).The end user can use the operator's home page or set up another one in the mobile
phone.
Th URL can be set as follows:
e
The Ho
me age is the link to the first WAP site you will acces
p
most cases, this menu item of th
o
perator's WAP homepage.
Y
ou can change this default homepage by specifying the name and URL address of another homepage, which will
then replace the current one
2
.Enter Address:
Allows to enter a WAP site address, to which you can connect dir
a quick way to access WAP addresses
3
.S
ettings:
a) Edit HomePage:
Allow you to change the Homepage name and address:
b) Select Profiles:
This menu allows you to select one of the available profiles, and to then define the connection settings
for each of them:
c) Connection:
- Select Connection: Allows you to select one of the data profiles you have
defined in
In the list that appears, select the connection setting of your choice.
- Bearer: Allows selecting the type of network used by the selected
profile when launching a connection.
the GPRS network for WAP connections.
PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
the
port
e WAP services menu is preconfigured
Settings
>
Network
>
Access settings.
Service Repair Support
number
(optional
s when launching WAP from the idle screen. In
ectly when selecting it and pressing "OK". This is
GSM
or GPRS: your mobile will only use the GSM or
COMPANY RESTRICTED
VY-V-640-P530
Page : 29 of 64
Langue : EN
Date : 21/07/03
if
=
80)
and
and will connect directly to your
VY-V-640-P530
the
access
path
Advertisement
Table of Contents
