Husqvarna TC 85 Owner's Manual page 105

–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
401951-10
Mount and tighten screw
Guideline
Screw, shift
lever
15 TUNING THE ENGINE
A
of the shift lever and shift shaft.
1
with washers.
M6 14 Nm (10.3 lbf ft)
®
Loctite 243™
103