Cisco 7931G Manual page 28

Cisco Unified IP Phone Installation
The Cisco Unified IP Phone supports having both IPv4 and an IPv6 address concurrently. You can configure
Cisco Unified Communications Manager to support IPv4 addresses only, IPv6 addresses only, or support
both IPv4/IPv6 addresses.
Step 5 If you are configuring the network settings on the phone for an IPv6 network, you can set up an IP address
for the phone by either using DHCP or manually entering an IP address.
a) Using DHCP: To enable DHCP and allow the DHCP server to automatically assign an IP address to the
Cisco Unified IP Phone and direct the phone to a TFTP server, choose Settings > Network Configuration
> IPv6 Configuration and:
• To enable DHCPv6, set DHCPv6 Enabled to Yes. DHCPv6 is enabled by default.
• To use an alternate TFTP server, set IPv6 Alternate TFTP Server to Yes, and enter the IP address
Note
b) Without DHCP:You must configure the IP address, subnet mask, TFTP server, and default router locally
on the phone; choose Settings > Network Configuration > IPv6 Configuration:
To disable DHCP and manually set an IP address:
1 To disable DHCPv6, set DHCPv6 Enabled to No.
2 Enter the static IP address for phone.
3 Enter the IPv6 prefix length.
4 Set IPv6 Alternate TFTP Server to Yes, and enter IP address for IPv6 TFTP Server 1.
You must also enter the domain name where the phone resides by Choosing Settings > Network
Configuration.
Note
Step 6 Set up security on the phone. Provides protection against data tampering threats and identity theft of phones.
Step 7 Make calls with the Cisco Unified IP Phone. Verifies that the phone and features work correctly.
For more information, see the Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications
Manager (SCCP and SIP).
Step 8 Provide information to end users about how to use their phones and how to configure their phone options.
Ensures that users have adequate information to successfully use their Cisco Unified IP Phones.
Related Topics
Cisco Unified IP Phone Power
Install Cisco Unified IP Phone
Phone Cable Lock
Phone Startup Verification
Network Settings
Network Configuration Menu
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
28
for IPv6 TFTP Server 1.
Consult with the network administrator if you need to assign an alternative TFTP server instead
of using the TFTP server assigned by DHCP.
The Cisco Unified IP Phone supports having both IPv4 and an IPv6 address concurrently. You
can configure Cisco Unified Communications Manager to support IPv4 addresses only, IPv6
addresses only, or support both IPv4/IPv6 addresses.
Cisco Unified IP Phone 7931G