Table of Contents
Advertisement
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
Description
•
Phillips Screwdriver .................................... 1
•
Safety Glasses (for each person) .............. 1
•
Air Compressor .......................................... 1
•
Adjustable Wrench with 1
•
Pneumatic Tool Oil ........................4 Ounces
•
Dust Collection System .............................. 1
Model G0611X (Mfd. 07/15)
SECTION 3: SETUP
HEAVY LIFT!
Qty
⁄
" Capacity ....... 1
1
4
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box Inventory (Figure 3):
A. Dovetail Machine (not shown) .................... 1
B. Hex Bolts M8-1.25 x 20 .............................. 4
C. Flat Washers 8mm ..................................... 4
D. Fixed Chaser 2
⁄
" ....................................... 1
1
2
E. Fixed Chaser 3" .......................................... 1
F.
Indicator Bar 1
⁄
" and 2
1
2
G. Hex Wrench Set (1.5-6mm) ..................1 Ea.
H. Combo Wrench Set
(8-10, 11-13, 12-14, and 17-19mm) ........1 Ea.
I.
Extra Vertical HDPE Fence ........................ 1
J.
Extra Horizontal HDPE Fence .................... 1
K. Open-End Offset Wrench 30mm ................ 1
C
B
D
K
Figure 3. Model G0611X inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Qty
⁄
" ......................... 1
1
2
E
F
G
I
H
J
-11-
Advertisement
Table of Contents
