Important Information For Some Countries - Brother DCP-T310 Product Safety Manual

13. Where it is necessary to dial prefix digits, such as a Caller Display override code ("0196" or
"0197"), this unit will have to be used in conjunction with an associated tone signalling
(DTMF) telephone.
14. Note that some telephones are NOT compatible with this unit and dialling errors may result if
the two devices are used together in other than quiet conditions. The Telecom Faults Service
is NOT to be called should such problems arise. In such cases, it is recommended that the
prefix and wanted number are dialled manually.
15. The answer delay setting of this equipment shall not be set to less than the default setting as
this will destroy Caller ID information.
16. The caller ID telephone numbers which are displayed and stored in this equipment include
the caller's area code or cellular code but do not include the toll access "0" prefix. When
calling back it is necessary to add a "0" to the telephone number, or if the telephone number
is a local number, omit the area code digit. If the toll services of a service provider other than
Telecom are being used then a toll charge may be incurred if the "0" prefix toll access code
and area code are used.
17. When using the Caller Line Identification incorporated in this device, verify the integrity of the
recorded digits prior to dialling.

Important Information for Some Countries

Important Safety Instructions
1. Read all of these instructions.
2. Save them for later reference.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning the outside of the product and the
scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5. Do not place this product near water.
6. Do not place this product on an unstable cart, stand, or table. The product may drop,
causing serious damage to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be placed
near or on a radiator or heater. This product should never be placed in a built-in installation
unless proper ventilation is provided.
8. This product should be connected to an AC power source within the range indicated on the
rating label. Do not connect it to a DC power source. If you are not sure, contact a qualified
electrician.
9. This product is equipped with a 2-wire type plug or a 3-wire grounding type plug (Only for
Singapore, Malaysia, Hong Kong and India), a plug having two or three pins. This plug will
only fit into only a grounding-type power outlet. This is a safety feature. If you are unable to
16