NETGEAR D7000 Quick Start Manual page 2

You can use this diagram to connect your modem router or follow the detailed instructions in this booklet.
1. Attach the antennas.
Attach the antennas on the threaded antenna
posts.
Position the antennas as shown.
2. Connect the modem router to a DSL
service (ADSL or VDSL).
Install the DSL microfilter between the phone
line and the phone. Use the phone cable to
connect the DSL microfilter to the DSL port on
the modem router.
3. Power on the modem router.
Wait for the Power LED to light white.
If the Power LED does not light, press the
Power On/Off button.
Wait for the WiFi LED to light white.
4. Check the DSL LED.
If the modem router is connected to a DSL
service, the DSL LED lights white.
5. Connect a device.
You can use an Ethernet cable or connect with
WiFi.
To connect with WiFi, use the pre‑assigned
WiFi network name and password on the label
on the modem router.
Ethernet cable
Computer
Modem
router
Phone cable
DSL
microfilter
Power
adapter
ADSL or VDSL
Internet
6. Connect to the Internet.
Launch a web browser. The NETGEAR
installation assistant displays.
If you do not see the NETGEAR
installation assistant,
enter www.routerlogin.net in the
address field of the web browser. If a
login window displays, enter admin for
the user name and password for the
password.
The NETGEAR installation assistant
determines your Internet connection. If
the modem router successfully connects
to the Internet, the Internet LED
lights white.
7. Get the genie app.
Download the free genie app from
www.NETGEAR.com/genie.
Easily share media, files, and printers
on the network from your smartphone,
tablet, or laptop.
8. Get the user manual.
You can get the user manual online at
http://downloadcenter.netgear.com
or through a link in the product's user
interface.