Related Manuals for Makita M12HV
Summary of Contents for Makita M12HV
- Page 1 OPERATOR'S MANUAL Cat. No. M12HV M12™ COMPACT VACUUM To reduce The risk of injury, user musT read and undersTand operaTor's manual.
-
Page 2: Important Safety Instructions
imporTanT safeTy insTrucTions warning WhEN USING AN ELECTRICAL VACUUM, bASIC PRECAUTIONS ShOULD ALWAyS bE fOLLOWED, INCLUDING ThE fOLLOW- ING: READ ALL INSTRUCTIONS bEfORE USING VACUUM. fOR hOUSEhOLD OR COMMERCIAL USE. bEfORE USING ThE VACUUM, READ ThIS OPERA- TOR’S MANUAL, bATTERy PACK AND ChARGER OPERATOR’S MANUALS, AND ALL LAbELS ON ThE VACUUM, bATTERy PACK, AND ChARGER. -
Page 3: Specific Safety Rules
Installing/Removing the Dust Canister and filter To remove the dust canister: 1. T urn OFF the tool. 2. Remove the battery pack. Volts 3. While holding over the trash, press the dust canister latch back and rotate the dust canister to the unlock position. Pull the dust canister away Direct Current from the vacuum. read operator's manual Wear eye protection specificaTions Cat. No. Volts DC Air flow M12HV... -
Page 4: Operation
mainTenance 4. Empty dust from the dust canister. 5. To clean the filter, rotate the filter using the black finger tabs only. Pull the filter away from the vacu- warning um and tap clean or blow off with compressed air. To reduce the Do not clean with water. Replace filter if damaged risk of injury, always unplug the charger and or suction decreases (Cat. No. 49-90-1950). remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a milwaukee service facil- ity for ALL repairs. - Page 8 GENERAL POWER TOOL SAFETY WARNINGS ® Please refer to the Techtronic Industries Pty. Ltd. Warranty Terms and Conditions for MILWAUKEE products and accessories which is supplied with the tool or kit. This warranty applies only to product purchased from an authorised ® MILWAUKEE dealer in Australia or New Zealand. AUSTRALIA AND NEW ZEALAND ® ® MILWAUKEE prides itself in producing a premium quality product that is Nothing But Heavy Duty . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact the store where the product was originally purchased or one of our authorised MILWAUKEE ® service centres. For a list of authorised MILWAUKEE ® dealers or service centres please contact MILWAUKEE ® Customer Service on: Australia: 1300 MILWAUKEE (1300 645 928) www.milwaukeetools.com.au New Zealand: 0800 279 624 www.milwaukeetools.co.nz Milwaukee Electric Tool Corporation 13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005 Milwaukee Electric Tool Corporation (Australia) Techtronic Industries (Australia) Pty.