Download
Share
Print this page
HIKVISION Villa IP Setting Up
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. Villa IP
  6. Setting up

HIKVISION Villa IP Setting Up

Ip intercom for the first time with wifi room stations only
Hide thumbs

Advertisement

Quick Links

Download this manual
Setting Up IP Intercom For The First Time
With WiFi Room Stations Only
Introduction
This tech guide will step you though the steps to set up the HikVision Villa IP Intercom for
the first time when using the Wi-Fi room stations (104-829).
This will allow each of the Sub room stations (Wi-Fi room stations (104-829)) to connect to
the system by Wi-Fi rather than using a LAN cable. The Master room station and the door
station still need to be connected by a LAN cable.
There are 2 sections in this tech guide.
Section 1.1 (On page 3) will guide you through the step on how to access the IP Intercom in
the iVMS software.
Section 1.2 (On page 4) will guide you through how to connect 1 door station to many room
stations.
Page 1

Advertisement

loading

Related Manuals for HIKVISION Villa IP

Summary of Contents for HIKVISION Villa IP

  • Page 1 With WiFi Room Stations Only Introduction This tech guide will step you though the steps to set up the HikVision Villa IP Intercom for the first time when using the Wi-Fi room stations (104-829). This will allow each of the Sub room stations (Wi-Fi room stations (104-829)) to connect to the system by Wi-Fi rather than using a LAN cable.

  • Page 2: Before You Begin

    Before you begin Ensure you have the iVMS-4200 software version 2.4.2.55 Build 20161209 installed on your computer. This can be downloaded from the Ness Website. Before you program your door and room stations ensure you have version 1.4.0 build 170302 or later installed. You can find the firmware version later on during the setup of the device.
  • Page 3 1.1 Setting up the iVMS 1. Click on ‘Device Management’. 2. Click on ‘Add new Device Type’ from the left side menu. 3. Ensure that ‘Encoding Device / Door Station’ and ‘Indoor Station / Master Station’ is ticked and click on OK. Page 3...
  • Page 4 One Door Station to Many Room Stations Setup When setting up multiple room stations for the first time, it’s recommend to only connect one room station at a time. This will make it easy to work out what room station you are setting up.
  • Page 5 5. When prompted, enter in a password for this door station. This can be anything you want. You can use the same password as you use to login to iVMS which will make it easy to remember. If you ever want to reconfigure this door station at a later time, you will need to know this password.
  • Page 6 8. Make sure the IP says 192.0.0.65 and then enter in the password you used to activate the door station, and then click on OK. 9. Select the Door station from the bottom section and then click on ‘Add to Client’. 10.
  • Page 7 11. Click on ‘Remote Configuration’ from along the top. 12. Select ‘Intercom’ > ‘Dial’ from the left side menu. 13. Enter in a Room number for this door station to call, then click Save. In my example, its going to call room number 1. 14.
  • Page 8 15. Set the SIP Server IP address to be your door station’s IP address. (192.0.0.65). Leave all the other settings as default. Once the IP has been set, press Save. 16. You now need to reboot the room station. Click on ‘System’ > ‘System Maintenance’ then click on ‘Reboot’.
  • Page 9 Master Room Station Setup Handy tip when setting up room stations, connect the room station you are configuring only, then plug the next one in etc. Connecting them all in together will make it hard to work out what room station you are configuring since they are all displaying in the list with the same IP address.
  • Page 10 4. When prompted, enter in a password for this door station. This can be anything you want. You can use the same password as you use to login to iVMS which will make it easy to remember. If you ever want to reconfigure this door station at a later time, you will need to know this password.
  • Page 11 7. Change the IP address to 192.0.0.100 and then enter in the password you used to activate the room station and then click on OK. 8. Select the room station from the bottom section and click on ‘add to client’ 9.
  • Page 12 11. Click on ‘Intercom’ > ‘ID Configuration’ from the left menu. 12. Give the room station a room number (eg. 1), then click Save. Note, make sure the device type is set to Indoor Station. 13. Click on ‘Network’ > ‘Linked Network Configuration’ from the left menu. Page 12...
  • Page 13 14. You now need to set some IP addresses for the system. Master Station IP Address – Set this to 0.0.0.0 (Main) Door Station IP Address – Set this to 192.0.0.65 SIP Server IP Address – Set this to 192.0.0.65 Security Control panel IP Address –...
  • Page 14 Once the Master room station reboots and the UI is displayed on the room station, connect it to the customers Wi-Fi access point. 16. Find and tap on the WiFi tile from the home screen. 17. Enable the WiFi by tapping on the toggle button next to Enable Wi-Fi. 18.
  • Page 15 20. If your WiFi network requires a password, then tap on the password field and enter in your WiFi Password. Once your WiFi Password has been entered in, tap on the Connect button. 21. If the connection is succuessful then you will see it say Wi-Fi connected under the WiFi it has connected to.
  • Page 16 Sub Room Station Setup Although you are not going to connect the sub room stations with the LAN cable, it’s recommended to plug the sub room station into the switch while setting it up. Then later you can move it and connect it to a separate power supply. 1.
  • Page 17 5. Select the room station you just activated and click on ‘Modify NetInfo’. 6. Make sure the software version is v1.4.0 build 170302 or above before continuing. If it’s not then you will need to update the firmware before setting up the system. Refer to the firmware update tech note for steps on how to update the firmware.
  • Page 18 Enter in the password which was used to activate the room station, then click on OK. 8. Select the room station from the bottom section and click on ‘add to client’ 9. Now you need to set some settings for this room station. Leave the adding mode as IP/Domain.
  • Page 19 8. Click on the room staton you just modifiyed from the top section and click on ‘Remote Configuration’ 9. Click on ‘Intercom’ > ‘ID Configuration’ from the left menu. 10. Since this is a sub room station, you need to select ‘Station Extension’ as the device type. You then need to enter in the No.
  • Page 20 11. Click on OK. This will cause the room station to reboot. You need to wait for the room station to reboot before continuing. 12. Select the sub room station you were just setting up and click on ‘Remote Configuration’ 13.
  • Page 21 15. You now need to reboot the room station. Click on ‘System’ > ‘System Maintenance’ then click on ‘Reboot’. Once the Master room station reboots and the UI is displayed on the room station, connect it to the customers Wi-Fi access point. 16.

  • Page 22: Additional Information

    20. If your WiFi network requires a password, then tap on the password field and enter in your WiFi Password. Once your WiFi Password has been entered in, tap on the Connect button. 21. If the connection is succuessful then you will see it say Wi-Fi connected under the WiFi it has connected to.

This manual is also suitable for:

104-829