Advertisement
Using the Personal Tracker App
Download the Personal Tracker app from the Apple Store.
Sending/Receiving Messages
You can send and receive mes-
sages without cell phone cover-
age using the Personal Tracker
application. Messages can be
sent and received from the fol-
lowing:
• ViewPoint (the online
tracking system)
• SMS recipient
• Email recipient
• Another tracker
Pre-set message can be con-
figured and stored in Favorites
so that you can send messages
quickly and easily.
Contacts
The Personal Tracker app integrates the contacts from your iPhone.
To create a new contact, create a contact on the iPhone.
Technical Specifications
Specification
Operating Temperature
- 20°C to 55°C (-4°F to 131°F)
Storage Temperature
-40°C to 60°C (-40°F to 140°F)
Relative Humidity
95% @ 40°C (104°F) non-
condensing
IP Rating
IP67
Shock & Vibration
MIL-STD-810G
Sending an SOS Message
To send an SOS message:
1. Touch SOS at the bottom of the screen.
2. Confirm by touching Send.
The application indicates that the message has been successfully
sent.
After sending an SOS the interactive SOS window opens allowing
the user to send text messages to their monitoring system.
To send an SOS message from the
tracker, press and hold the SOS
button on the top of the tracker for 2
seconds.
If connected to the iPhone you
must confirm this action on the
screen of the iPhone before the
message is sent.
In standalone operation (tracker
only) the message is sent immedi-
ately when the button is pushed.
Technical Assistance
If you require further assistance, please contact Technical Support
at hgtsupport@honeywell.com.
Patents
For patent information, refer to www.hsmpats.com.
Disclaimer
Honeywell International Inc. ("HII") reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material. HII disclaims all responsibility
for the selection and use of software and/or hardware to achieve intended
results.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
2016 Honeywell International Inc. All rights reserved.
Apple and iPhone 6s are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc.
Settings
The Settings menu is used
to configure the tracker and
how it works with the
iPhone.
In this menu you can set up:
• Reporting rates
• Mailbox Check
• Power sharing
• Pre-set messages
• Etc.
You can also access the
Status screen for detailed
status information.
For more information on
configuring your device, see
the Personal Tracker User's
Guide.
Note: If you are using the tracker in standalone operation reporting
rates and wakeup intervals are configured using the
ViewPoint web application or custom application (API).
Default Communication Settings
Default
Setting
Range
Value
Reporting Interval
10 min.
2 minutes to 24 hours
GPS Acquisition
1X
1 to 128X per transmission
Mailbox Check
1X
1X to 128X per transmission
Reporting Interval
2 min.
2 minutes to 24 hours
(Alert Mode)
GPS Acquisition
1X
1 to 128X per transmission
(Alert Mode)
Mailbox Check
1X
1 to 128X per transmission
(Alert Mode)
Advertisement
