Cisco Asr 9000 Series Aggregation Services Router Modular Quality Of Service Configuration Guide, Release - Cisco ASR 9000 Series Configuration Manual

Configuring Tail Drop
Command or Action
Step 5
priority[level priority-level ]
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
priority level 1
Step 6
police rate percent percentage
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# police
rate percent 30
Step 7 class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class2
Step 8 bandwidth {bandwidth [units] | percent value}
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
bandwidth percent 30
Step 9 bandwidth remaining percent value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
bandwidth remaining percent 20
Step 10 exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 11
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap)# exit
Step 12 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface POS
0/2/0/0

Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release

6.1.x
48
Configuring Modular QoS Congestion Avoidance
Purpose
Specifies priority to a class of traffic belonging to a policy map.
Configures traffic policing.
Specifies the name of the class whose policy you want to create
or change. In this example, class2 is configured.
(Optional) Specifies the bandwidth allocated for a class
belonging to a policy map. This example guarantees 30 percent
of the interface bandwidth to class class2.
(Optional) Specifies how to allocate leftover bandwidth to
various classes. This example allocates 20 percent of the
leftover interface bandwidth to class class2.
Returns the router to policy map configuration mode.
Returns the router to global configuration mode.
Enters the configuration mode and configures an interface.