Connecting The Magnetic Antenna Assembly (Optional); Procedure; Installing The Magnetic Mount Antenna Assembly - Motorola WMC6300 User Manual

Pull straight out at the connector to avoid damaging the card, connector or cable.
2

Connecting the Magnetic Antenna Assembly (Optional)

Complete the following procedure to install the Magnetic Mount Antenna on the rooftop of a vehicle.
The length of the Antenna cable is approximately 12 feet.

Procedure 3-3

Installing the Magnetic Mount Antenna Assembly

Attach the Magnetic Antenna to the metal rooftop of the vehicle so that the antenna is in a vertical
1
orientation.
Route the remaining 12 foot cable as required, to arrive at the Host Computer.
2
3 Insert the Antenna Cable Connector into the WMC6300 antenna port as shown in
Figure 3-2
6881011Y52-O August 2005
result in excess pressure being applied to the connection between
the WMC connector and the board, which could crack or otherwise
damage a solder joint.
.
The base of the antenna contains a powerful magnet that secures
the antenna to the rooftop. Use care when attaching the antenna.
Never use the WMC6300 or the WMC7300 with the Antenna
removed from the rooftop, or with the Antenna disconnected from
the Card.
The connector will snap into place when fully inserted.
Attach Magnetic Mount Antenna to the WMC6300
MOTOMESH 1.0 Wireless Modem Card Users Guide
3-3
Figure 3-2 .