Hardware Installation Notes; Ports And Connections; Operator Supply List - Motorola MOTOMESH Duo 4300-49 User Manual

Chapter 2: Infrastructure Device Installation
Additional information about the Web Interface utility can be found in the MOTOMESH Duo 2.1 Web
Interface Users Guide.

Hardware Installation Notes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For a MOTOMESH Duo 2.1 deployment, a permanent power source for each MOTOMESH Duo 4300
device must be provided. All infrastructure devices require professional installation to ensure that the
installation is performed in accordance with FCC licensing regulations
Infrastructure devices are fitted with a single pivot mounting bracket designed to be attached to light
poles and other probable installation sites. Alternate mounting hardware is available for mounting
directly to posts or structures that are too large for the standard bracket. Optional remote antenna
mount hardware is also available for use with the alternate mounting hardware.

Ports and Connections

The following list defines the standard ports and connections for the MOTOMESH Duo 4300 device
running in either the IAP or MWR modes.
•
•
•
•
An optional personality plug must be used if the PoE port will be utilized. See
Procedure 2-1
to view a graphic of the available personality plugs.

Operator Supply List

The Network Operator must supply the following equipment:
•
•
•
May 2008
100-240V A/C Power Cable with flying leads
One non Power over Ethernet (PoE) Ethernet port
One Power over Ethernet (PoE) capable port supporting
Standards based 802.3af PoE (must use with a black personality plug., sold
o
separately)
Canopy Connect PoE (must use with a white personality plug, sold separately)
o
Mounting Bracket
for information on how to use the personality plug. See
Mounting Location
Power Source (100-240 VAC depending on IAP configuration)
Ethernet connection between the IAP and MiSC.
.
.
2-2
Figure 2-6