Makita VR250D Technical Information page 3

R
epair
Before repairing, completely clear the concrete from the machine, especially use care of the screws and
joint section between parts.
1. Disassembling/assembling of the body and Flexible Hose
(1) Use the plastic hammer to hit the nut holding Flexible
Hose.
(2) Use the plier to hold the caulking points on the flexible wire, use
the spanner to hold spindle, and turn it to remove.
For assembling, proceed (1)and(2) in the reverse order
2. Disassembling/assembling of motor
(1) Loosen the screws(2 pieces) for mounting the supporter, and remove the bearing box.
(2) Pull out the bearing from the spindle.
(3) Loosen the screws(2 pieces) for mounting the motor, and remove the motor.
For assembling, proceed (1)-(3) in the reverse order.
Note) To insert the bearing, place it to spindle flange.
Screw for mounting supporter
Motor
Plastic hammer
Screw for mounting motor
Supporter
Ball bearing
Plyer
Loosen
Bearing box
Nut
Loosen
Spanner
Loosen
Flexible wire