Remote Control - Honeywell MN09CES User Manual

Mn09 series, mn10 series, mn12 series, mn13 series
Hide thumbs Also See for MN09CES:
Table of Contents

Advertisement

USE & OPERATION (CONTINUED)

REMOTE CONTROL

The functions work the same as the portable air conditioner's Touch Screen Control Panel.
All key functions can be accessed from the remote control.
Fan Speed Control
• HIGH • MEDIUM • LOW
Timer Control
In running mode: Auto switch off
In stand-by mode: Auto switch on
Press ▼ or ▲ button to adjust the
time setting for 1 hour intervals.
Note:
Battery Installation: Remove the cover on the back of the remote control and insert two AAA batteries
with + and - pointing in the proper direction according to the polarity markings.
Caution:
Use only two AAA or IEC R03 1.5V batteries.
Remove the batteries if the remote control is not in use for a month or longer.
All batteries should be replaced at the same time, do not mix with old batteries.
Properly dispose of used batteries.
6
Power Control
ON / OFF
Temperature / Timer Set
Used for adjusting the timer and temperature.
When ▼ or ▲ key is pressed in cool mode, the
set temperature is displayed and may be
adjusted. After 10 seconds the display will
revert back to room temperature.
Timer setting is available from 1-24 hours by
pressing the key ▼ or ▲
Mode Control
Press this button to change the operation mode
in the order of:
Cool
Heater*
*Applicable for models with Heating feature only.
EN
Dehumidify
Fan

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents