Honeywell RTH9585 User Manualline page 31

Changing system setup
Note: Touch the orange Help button on any screen for more information.
System Setup Options (SETTINGS > System Setup)
Screen Title
Language
Thermostat installed
in
Your thermostat
location
Your thermostat
controls
Your system type
Your forced air
heating system type
Efficiency of your
heating system
Your heating system
type
Number of cooling
stages
Number of heating
stages
Your fan control
Type of changeover
valve
Number of heat
pump compressor
stages
Your backup heat
Settings and Options (Options vary depending on setup.)
English/Français/Español.
Home/Business (Thermostat is used in a residential (default) or
commercial setting).
THERMOSTAT
Touch
custom name using a keypad. If you have only one thermostat, you can
leave the name as THERMOSTAT. For business installations you can check
a box to display the thermostat name on the home screen.
Select Heating or Cooling or both (default).
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option
offers different choices on the following screens. See Step 9e under Installing
your Thermostat on page 10.
Select type of furnace. This menu option only appears if Forced Air is
selected for "Your System Type".
Select Standard Efficiency Forced Air (default) or High Efficiency Forced
Air.
If you selected Hot Water or Steam on "Your system type," select the
specific heating system here.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires
you have connected: 'Y' wire only (1 stage) or 'Y' and 'Y2'(refer to your
check list in Step 6 on page 5.) Number of cool stages does not
appear if "Heat Pump" is selected or cool stages is set to "0".
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires
you have connected: 'W' wire only (1 stage) or 'W' and 'W2' (refer to your
check list in Step 6 on page 5.)
"Forced Air" is selected for "Your System Type".
Select whether your thermostat (default) or heating system controls the fan.
Your fan control only appears if "Electric" is selected for "Your Forced Air
Heating System Type".
If you selected Heat Pump on "Your system type," select whether it uses a
cooling changeover valve (default) or heating changeover valve. f you are
unsure, note which wires you have connected: refer to your check list in
Step 6 on page 6.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires
you have connected: 'Y' wire only (1 stage) or 'Y' and 'Y2'(refer to your
check list in Step 6 on page 6.).
No or Yes (default) you can determine whether you have backup heat by
refering to your check list in Step 6 on page 6. Your backup heat only
appears if "Your System Type" is set to Heat Pump.
button to display a screen where you can enter a
Number of heat stages only appears if
29
69-2715EF—07