Adding An Additional Base Radio To Mts 4 - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
388 | Expansion Options

Adding an Additional Base Radio to MTS 4

Follow the procedure below to install an additional Base radio for MTS 4. The images below illustrate cable
connections before adding a third Base Radio to the configuration.
Procedure:
1 Remove the Blind Plate where the additional Base Radio is to be added.
2 Label all Rx cables with labels included in the expansion kit.
3 Attach the Rx cables to the filters. Connect them according to the scheme below:
#
15
16
17
4 Attach the Tx cable to the Tx input of the Cavity Combiner according to the scheme below:
#
11
12
18
5 Attach the Ethernet cable to the appropriate BR input of the Site Controller according to the scheme below:
#
2
6
11
Send Feedback | September 2014 | 6802800U74-AD
Part no Cable type
3066543B02 RX cable
Note: If Base Radio to be added is BR2, replace BR# with BR2 i table above, and so on.
Note: Index numbers in table above refer to cable connections shown in
Note: At this stage only connect the cables to the filters.
Note Part no
If BR2 3066543B08
If BR3 3066543B08
If BR4 3066543B08
Note: Index numbers in table above refer to cable connections shown in
Note: At this stage only connect the cable to the Cavity Combiner (ATCC or MTCC).
Note Part no
If BR2 3066544B02
If BR3 3066544B04
If BR4 3066544B05
Note: Index numbers in table above refer to cable connections shown in
Note: At this stage only connect the cable to the Site Controller.
Note: If the Ethernet cable is being wired from a Base Radio in one Module Cage to a Site Controller in
another Module Cage, the Ethernet cable is to be drawn outside of the Module Cage.
Equipment Type: ABZ89FC5827 / 109AB-5827
Label From
Rx1 Filter 1 / BR#
Rx2 Filter 2/ BR#
Rx3 Filter 3/ BR#
Cable type From
Tx cable CC1 / TxB
Tx cable CC2 / TxA
Tx cable CC2 / TxB
Cable type From
Ethernet cable BR2 / SC1
Ethernet cable BR3 / SC1
Ethernet cable BR4 / SC1
To
BR# / Rx1
BR# / Rx2
BR# / Rx3
Cable Connections.
To
BR2 / Tx
BR3 / Tx
BR4 / Tx
Cable Connections.
To
SC1 / BR2
SC1 / BR3
SC1 / BR4
Cable Connections.
Exhibit D2