Connecting External Components; References; Maintenance; More Information - Kenwood DDX4018DAB Instruction Manual

Installation and Connection Installation and Connection

Connecting external components

1 Navigation input (NAV)*1
2 Steering wheel remote controller input
(REMO-IN)*1
• Connect to the car's steering remote harness.
Contact your KENWOOD dealer for details.
3 Microphone input (MIC) (Page 45)
4 Audio video input (AV-IN)
Connect the following type of 4-pole mini plug:
1 Left audio
2 Right audio
3 Ground
4 Composite video
5 Video output (V-OUT)
6 Rear view camera input (R-CAM)
46 ENGLISH
7 Output terminals*2
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
SW: Woofer preouts
*1 Only for DDX4018DAB/DDX4018BT.
*2 When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.

References

References

Maintenance

Cleaning the unit
• Do not use any solvent (for example, thinner,
benzine, etc.), detergent, or insecticide. This may
damage the monitor or the unit.
• Gently wipe the panel with a soft, dry cloth.
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not
use any solvents.
• When removing discs from this unit, pull them out
horizontally.
• Remove burrs from the center hole and disc edge
before inserting a disc.

More information

About playable files
Audio files
• This unit can play back the following files with
following codec and extension code:
– For disc: MP3 (.mp3), WMA (.wma), WAV (.wav),
AAC (.m4a)
– For USB mass storage class device: MP3 (.mp3),
WMA (.wma), WAV (.wav), AAC (.aac, .m4a),
FLAC (.flac)