NEC UNIVERGE SV8100 System Hardware Manual page 91

UNIVERGE SV8100
System Hardware Manual
Figure 3-23 Install Additional CHS2U STAND KIT (EXT)
4. Using supplied screws, secure the CHS2U STAND KIT to the
floor (refer to Figure 3-23 Install Additional CHS2U STAND KIT
(EXT) on page 3-21).
5. Connect the ground wire to all chassis. Refer to
19" Chassis Grounding on page 3-52
grounding the system.
6. Refer to 2.7 Installing the 19" Chassis on page 3-39
installation of the chassis or, Chapter 5 paragraph
Installing an Extension or Trunk Blade on page 4-4
installation of blades.
Issue 7.0
Metal
Brackets
2.7.5 Install
for complete details on
to continue
2.2
for
3 - 21