Yamaha RMAX Type II G Unit Operation Manual page 48

Pre-Flight Preparation and Inspection
Moving Forward or Backward
Lift the tail by holding the grip handle of the stone
guard to move the helicopter forward (or backward).
Make sure to hold the grip handle to move
the helicopter forward or backward. Do not
hold the tail cover or antenna, as this could
lead to equipment damage.
Lifting and Lowering
1 Remove the main rotor blades before loading the
helicopter on a truck bed. (See page 4-15.)
2 Make sure that 2 persons or more lift the helicop-
ter, with each person holding the runner as
shown.
G Do not hold the helicopter by the exhaust
pipe of the muffler or the bar for attaching
the sprayer tank, as this could lead to
equipment damage.
G Transport carefully so as not to damage
the tail rotor.
4-7
NOTICE
NOTICE
Grip Handle
Stone Guard