Configuring Ip Sla Reactions And Threshold Monitoring: Example - Cisco ASR 9000 Serie Configuration Manuals

Implementing IP Service Level Agreements

Configuring IP SLA Reactions and Threshold Monitoring: Example

The following examples show how to configure IP SLA reactions and threshold monitoring. You can:
• Configure a reaction for attributes that activate a true or false condition, for example, 1, 5, or 6.
• Configure a reaction for attributes that accept a threshold value.
• Configure additional threshold type options.
• Configure either the logging or triggering of action types.
configure
ipsla operation 1
type icmp echo
end
configure
ipsla operation 2
type icmp path-echo
end
configure
ipsla reaction operation 1
react timeout
action trigger
threshold type immediate
exit
exit
react rtt
action logging
threshold lower-limit 4 upper-limit 5
end
Operation 1 checks for timeout occurrence. If applicable, operation 1 generates a trigger event. If the rtt
keyword exceeds 5, an error is logged.
If operation 1 generates a trigger event, operation 2 is started. The following example shows how to configure
a reaction trigger operation by using the ipsla reaction trigger command:
configure
ipsla reaction trigger 1 2
end
Sum2NegativesSD : 1
MinOfPositivesDS: 1
NumOfPositivesDS: 1
Sum2PositivesDS : 1
MinOfNegativesDS: 1
NumOfNegativesDS: 1
Sum2NegativesDS : 1
JitterAve: 1 JitterSDAve: 1
Interarrival jitterout: 0
One Way Values :
NumOfOW: 0
OWMinSD : 0 OWMaxSD: 0
OWSum2SD: 0 OWAveSD: 0
OWMinDS : 0 OWMaxDS: 0
OWSum2DS: 0 OWAveDS: 0
timeout 5000
destination address 223.255.254.254
frequency 10
statistics interval 30
buckets 3
destination address 223.255.254.254
frequency 5
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Configuring IP SLA Reactions and Threshold Monitoring: Example
MaxOfPositivesDS: 1
SumOfPositivesDS: 1
MaxOfNegativesDS: 1
SumOfNegativesDS: 1
JitterDSAve: 1
Interarrival jitterin: 0
OWSumSD: 0
OWSumDS: 0
281