VARI❋LITE® - VL1000™ ERS L
Front Cover Removal
Parts:
ASSY, FRONT COVER (22.9663.1038)
Tools:
#2 Phillips screwdriver
To remove and replace front cover:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At head assembly, press in front cover latches to release
Step 3. Pull cover straight out until stopped by tether.
Step 4. Disconnect tether by removing 8-32x1/2" PFB screw and 8-32 Keps nut as
Step 5. Remove cover.
Step 6. Replace front cover by doing steps 2 through 5 in reverse. Ensure latches
26
S
UMINAIRE
ERVICE
shown.
lock into place.
Front Cover
Remove this 8-32x1/2" screw
(and nut) to disconnect tether
Figure 2-7: Front Cover Removal/Replacement
14-May-2009
M
ANUAL
Head Assembly
Latch (x2)
NOTE:
Yoke not shown for clarity.
(Figure
2-7).
Press in to
release cover
02. 96 63. 001 0 F