Panasonic 5000 Series Operating Instructions Manual page 36

Server Log-On & Log-Off
Secret Server Numbers
For maximum security, servers can be assigned a secret server number that does not
display or print. This number can be one to seven digits long. If your system has been set
up for this type of log-on, press the SERVER key, enter your secret server number, then
press SERVER again.
SVR
Employee Card Log-On
If you use the magnetic card reader for log-on, each server is issued an employee card. To
log-on, you press the SERVER key. Then run (or "swipe") your card through the reader.
Server Log-Off
In many applications, the server number automatically logs off after each transaction. If
so, you need not use the server log-off procedure.
If your number stays on the system until you leave, you must log off at the end of your
shift. This helps prevent others from using your number while you are away. The
procedure you use for log-off depends upon the procedure you use for log-on.
If you are using individual server keys or coded server numbers, enter zero (0) and press
SERVER to log off of the workstation.
If you are using secret server numbers or an employee card for log-on, press the SERVER
key. Enter zero (0), then press SERVER again to log off of the workstation.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
[ server # ]
[ swipe card ]
SVR
0 SVR
SVR 0
SVR
SVR
OPERATOR PROCEDURES
2-5