Replacing The Backup Battery - Motorola VC70N0 Quick Reference Manual

VC70N_QRG_72-164687-01_English_October 16.fm Page 24 Tuesday, October 16, 2012 2:29 PM
24

Replacing the Backup Battery

To replace the backup battery:
Use ESD precautions when installing the backup
CAUTION
battery.
Place the Main Power switch on the right side of the vehicle computer
1.
to the off position and perform cold boot to electrically disconnect the
battery from the unit.
Open the four screws securing the Backup Battery door on the back of
2.
the vehicle computer and remove the door.
Open the four screws securing the Backup Battery and disconnect the
3.
Backup Battery connector.
Carefully pull the Backup Battery out of the computer.
4.
Place the new backup battery into the well.
5.
Connect the Backup Battery connector to the connector inside the
6.
Backup Battery well.
Secure the battery into location using four screws.
7.
Place the Backup Battery door over the battery and secure using the
8.
four captive screws.
Be sure to torque the screws to seal the device properly.
CAUTION
Otherwise, sealing can be compromised.
VC70 Vehicle Computer
Backup Battery
Backup Battery
Connector