Linksys WUSB11 Quick Installation Manual page 50

Connect the Wireless-B USB
1
Network Adapter
A
Power on your PC.
B
The Adapter comes with the
USB cable you will use to
connect the Adapter to your
PC.
Connect one end of then
included USB cable to the USB
port of the Adapter.
C
Connect the other end of the
USB cable to one of the USB
ports on your computer.
The Power LED should light up
when the Adapter is plugged
in.
D
Raise the antenna. Make sure
the antenna is positioned
straight up into the air, at a 90°
angle from the Adapter. This
will ensure optimum wireless
operating range and
performance.
2
B
D