Rear Panel - D-Link DES-1018P User Manual

16/8 ports 10/100mbps poe plus 8 ports 10/100mbps plus 2 10/100/1000base-t/sfp combo ports unmanaged
Hide thumbs Also See for DES-1018P:
Table of Contents

Advertisement

D-Link Switch User Manual
Link/Act/Speed
Green
10/100 Mbps Ports
(Ports 1 to 16)
Off
PoE
Green
Ports 1 to 8 for
DES-1018P
Ports 1 to 16 for
Red
DES-1018MP
Off

Rear Panel

Power Cord Input: Connects the power cord.
Power Cord Retainer Slot: Connects the power cord retainer to the unit.
Switch GND: Connect a grounding wire to electrically ground the unit.
Kensington Security Slot
Solid
When there is a secure connection (or link) to 10/100
light
Mbps Ethernet device at any of the ports.
Blinking
When there is reception or transmission of data
Off
Solid
The port is successfully connected to a PoE device and
light
is powering the device properly.
Solid
The PoE port has failed, possibly due to:
light
1. PoE total power budget shortage.
2. Over current: Exceeds the power current of powered
3. Short circuit: An intentional short circuit has been
performed on a powered device.
Light off
No connection to a PoE device
Figure 2 – DES-1018P/MP Rear Panels
4
occurring at 10/100 Mbps.
No link
device's classification.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-1018mp

Table of Contents