Configuring Bgp Permanent Network - Cisco ASR 9000 Series Routing Configuration Manual

Implementing BGP
Command or Action
domain-distinguisher 1234
Step 5
commit

Configuring BGP Permanent Network

Configuring BGP Permanent Network
Perform this task to configure BGP permanent network. You must configure at least one route-policy to
identify the set of prefixes (networks) for which the permanent network (path) is to be configured.
SUMMARY STEPS
1. configure
2. prefix-set prefix-set-name
3. exit
4. route-policy route-policy-name
5. end-policy
6. router bgp as-number
7. address-family { ipv4 | ipv6 } unicast
8. permanent-network route-policy route-policy-name
9. commit
10. show bgp {ipv4 | ipv6} unicast prefix-set
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 prefix-set prefix-set-name
Example:
RP/0/RSP0/CPU0:router(config)# prefix-set
PERMANENT-NETWORK-IPv4
RP/0/RSP0/CPU0:router(config-pfx)# 1.1.1.1/32,
RP/0/RSP0/CPU0:router(config-pfx)# 2.2.2.2/32,
RP/0/RSP0/CPU0:router(config-pfx)# 3.3.3.3/32
RP/0/RSP0/CPU0:router(config-pfx)# end-set
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Configuring BGP Permanent Network
Purpose
Purpose
Enters prefix set configuration mode and defines a
prefix set for contiguous and non-contiguous set of
bits.
171