Table of Contents
Advertisement
cause the battery to stop powering the product. Feel the battery
pack; if it is too warm, allow it to cool down before resuming
operation. If the product still does not work, recharge the battery.
NOTE: The battery pack LED indicator will not work if the battery
protection feature has caused the battery pack to stop powering
the product. Release the on-off button or remove the battery pack
from the product and the battery pack LED indicator will resume
normal function.
The product also has a tilt protection function. If the product is tilted
beyond 40°, for about 7 seconds, the product will stop. The product
will not function if the tilt angle limit is exceeded or if the product is
in the vertical storage position.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
■
Injury caused by vibration. Always use the right tool for the
job. Use designated handles and restrict working time and
exposure.
■
Exposure to noise can cause hearing injury. Wear ear protection
and limit exposure.
■
Contact with the blades.
■
Injury from thrown objects.
RISK REDUCTION
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome. Symptoms
may include tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these symptoms.
There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating the
product wear gloves to keep the hands and wrists warm.
■
After each period of operation, exercise to increase blood
circulation.
■
Take frequent work breaks. Limit the amount of exposure per
day.
■
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING! Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
TRANSPORTATION AND STORAGE
Stop the product, remove the start key, and the battery. Make
sure that all moving parts have come to a complete stop. Allow the
product to cool down before storing or transporting.
Clean all foreign material from the product. Store it in a cool, dry,
and well-ventilated place that is inaccessible to children. Keep away
from corrosive agents such as garden chemicals and de-icing salts.
Do not store outdoors.
For transportation, remove start key, secure the product against
movement or falling to prevent injury to persons or damage to the
product.
WARNING! Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage, or transportation.
32
The blade is sharp. Keep all body parts away from the blade while
it is exposed.
MAINTENANCE
WARNING! Use only original manufacturer's replacement
parts, accessories and attachments. Failure to do so can cause
injury, poor performance and may void your warranty.
WARNING! Servicing requires extreme care and knowledge
and should be performed only by a qualified service technician.
For service, we suggest you bring the product to your nearest
authorised service centre for repair. When servicing, use only
original replacement parts.
Remove the start key and the battery before any cleaning or
maintenance task.
You may make adjustments and repairs described here. For other
repairs, contact the authorised service agent.
Check the grass catcher frequently for wear or deterioration.
After each use, clean the product with a soft dry cloth. Any part
that is damaged should be properly repaired or replaced by an
authorised service centre.
Check all nuts, bolts and screws at frequent intervals for proper
tightness to ensure the product is in safe working condition.
Be careful during adjustment of the product to prevent entrapment
of the fingers between moving blades and fixed parts of the product.
When servicing the blades, be aware that even though the power
source is switched off, the blades can still be moved.
The blade on the product is sharp. Use extreme caution and wear
heavy-duty gloves when fitting, replacing, cleaning, or checking bolt
security.
Replace damaged blades and bolts in sets to preserve balance.
SYMBOLS
Read and understand all instructions before
operating the product, follow all warnings and
safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines greater than 15°. Mow
across the face of slopes, never up and down.
To prevent serious injury, do not touch the cutting
blades.
Use the appropriate tools for maintenance to
prevent serious injuries.
Keep hands away from blade.
32
The
the
CAU
Hide quick links:
Advertisement
Table of Contents
