Connecting The Optional Yamaha Gns-Ms01 Speaker; Connecting Audio Devices (Line Out Jacks, Aux In Jacks, [Digital Out] Jack) - Yamaha genos Owner's Manual

Disconnecting the microphone
1
Set the [MASTER VOLUME] knob and the [MIC GAIN] knob to
the minimum position.
2
Set the [+48V] switch to off.
3
When using a condenser microphone, wait more than 10 sec-
onds.
4
Disconnect the microphone from the [MIC INPUT] jack.

Connecting the Optional Yamaha GNS-MS01 Speaker

Use the [TO RIGHT SPEAKER], [TO LEFT SPEAKER] and [TO SUB WOOFER] jacks. Refer to page 116.
Connecting Audio Devices (LINE OUT jacks, AUX IN jacks, [DIGITAL OUT]
jack)
IMPORTANT
Since Genos has no built-in speakers, you need to monitor its sound output via external audio equipment.
Alternatively, you can use a pair of headphones (page 22).
Using external audio devices for playback (LINE OUT jacks)
The LINE OUT jacks are used to send Genos output to a keyboard amplifier, stereo sound
system or mixing console. If you are connecting Genos to a mono sound system, use only
the LINE OUT MAIN [L/L+R] jack. When only this jack is connected (using a standard
phone plug), the left and right channels are combined and output through this jack—pro-
viding a convenient mono mix of Genos's stereo sound.
108
Genos Owner's Manual
Input jack
Phone plug Phone plug
(standard) (standard)
Audio cable
Disconnecting immediately can
damage the condenser micro-
phone and/or the instrument
itself.
• You can send a specific part to any
• You can also use the [DIGITAL OUT]
Powered speakers
To avoid possible damage, first
turn on the power to the instru-
ment, then to the external device.
When turning off the power, first
turn off the power to the external
device, then to the instrument.
Since this instrument's power
may automatically be turned off
due to the Auto Power Off function
(page 24), turn off the power to
the external device, or disable
Auto Power Off when you do not
intend to operate the instrument.
NOTICE
NOTE
desired LINE OUT SUB jack. The
operation display can be called up
via: [MENU]  [Line Out]. For
details, refer to the Reference Manual
on the website.
jack instead of the LINE OUT MAIN
jacks. However, the output volume
from [DIGITAL OUT] cannot be con-
trolled by MASTER VOLUME.
NOTICE