Epg Usage; Recording Menu; Use Philips Easylink - Philips 55PUT7032/56 User Manual

 Advanced setting: select PCM/RAW
mode of SPDIF.
Hearing impaired: turn on or off the
●
hearing impaired function.
AD switching: turn on or off AD
●
switch.

EPG Usage

EPG is the electronic program guide provided
on digital channels. With EPG, you can

View the list of the currently broadcast
digital programs.

Watch the current transmitted.

Set up program reminder.
Turn on EPG (Program Guide)
Press the TV GUIDE key on the remote control
to display the program list.
Note

EPG cannot be turned on directly in
non-digital TV mode.

Press the green key
guide to remind or cancel the program to
be played within one week.

Press the red key
scheduled recording function: Automatic
or manual is available. According to your
preference, you can manually set recording
time and mode.

Press the yellow key
program information on different dates.

Press the blue key
instructions.
in the program
to turn on the
to display the
to display the help

Recording Menu

Note

Make sure that the USB storage device has
been well connected.
Program recording
In digital TV mode, press
recorder menu on the screen and start program
recording. Press the / key to select the
operation menu and press OK key to confirm.
During recording, you can press keys such as 、
、■ to carry out shortcut operation.

Use Philips EasyLink

With Philips EasyLink you can operate a
connected device with the TV remote control.
EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the
connected devices. Devices must support
HDMI CEC and must be connected with an
HDMI connection.
To enable Philips EasyLink, you need to:

atible device can work normally.

Switch to EasyLink.
Note

The EasyLink compatible device must
have been turned on and selected as a
source.

Philips doesn't ensure 100%
interoperability with all HDMI-CEC
devices.
Turn on or off EasyLink
Note

Do not enable Philips EasyLink if you
don't intend to use it.
1. Press key.
2. Select TV Settings > EasyLink > EasyLink.
3. Select OFF or ON and then press OK key.
EN 12
● key to display the