Motorola AT Commands G24-L Developer's Manual page 415

+MIPSTAT
+MIPXOFF
+MIPXON
+MMAD
+MMAR
+MMICG
+MMGL
+MMGR
+MPCMC
+MPING
+MPINGSTAT
+MRST
April 15, 2008
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This unsolicited event is sent to
the terminal indicating a change
in link status.
This unsolicited event is sent to
the terminal to stop sending data.
This unsolicited event is sent to
the terminal when the G24-L has
free memory in the accumulating
buffer.
This command reads and
monitors digital value from a
specified ADC.
This command changes the status
of an SMS message in the G24-L
memory from "REC UNREAD"
to "REC READ".
This command handles the
selection of microphone gain
values.
This command displays a list of
SMS messages stored in the
G24-L memory.
This command enables the user
to read selected SMS messages
from the G24-L memory.
This command defines whether
the PCM clock is generated
continuously or not, when
module is in digital audio mode.
This command will allow
verifying IP connectivity to
another remote machine
(computer) by sending one or
more Internet Control Message
Protocol (ICMP) Echo Request
messages.
This is the unsolicited response
that the G24-L sends to the
terminal to inform of ping
execution status update and
provides summary statistics of
ping request when ping request
execution is completed.
This command enables customer
software to perform a hard reset
to the G24-L unit.
G24-L AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-288
Page 3-288
Page 3-289
Page 3-149
Page 3-101
Page 3-172
Page 3-89
Page 3-94
Page 3-153
Page 3-292
Page 3-296
Page 3-143
Page
A-13